The amount of power a house is expected to deliver has changed considerably over the past decade or two. A home that was wired for a few appliances and overhead lights now runs EV chargers, electric ranges, home offices, and whole-house entertainment systems, all at once, all on a panel that may never have been touched since the house was built. In Sterling Heights, that gap between original capacity and current demand is one of the most common reasons people call us. We handle the electrical work that closes it: panel upgrades, new circuits, wiring repairs, and everything in between.
We work with homeowners, property managers, and businesses throughout Sterling Heights and the surrounding Macomb County area. Whether the call is about a dead outlet in a single-family home, a subpanel for a detached garage, or a commercial space that needs its wiring brought up to code, the approach is the same: figure out what the job actually requires, explain it clearly, and get it done.
Call (947) 999-8795 and we will get you on the schedule.
Your time matters, so we keep the wiring job moving and that starts with getting the price right before anything is scheduled. When you call, we talk through the situation: what is happening, where it is happening, and what the property looks like. That conversation gives us enough to put a number together before anyone comes out.
What moves a quote is usually one of three things. The first is what the fault turns out to be once we are looking at it. A tripping breaker can trace back to an overloaded circuit, a failing breaker, or a wiring fault deeper in the wall, and each one involves different work. The second is what has to be opened up to reach it. Accessible wiring in an unfinished basement is a different job from the same repair inside a finished wall. The third is whether the existing circuit or panel can carry the change being asked of it. Adding a 240-volt circuit to a panel that is already at capacity means addressing the panel first.
We confirm the price before the visit is booked. If the scope changes once we are on-site, we explain why before any additional work continues.
Call (947) 999-8795 and ask what the quote covers. You will get a straight answer.
Electrical problems don't wait, and neither do we, so we take short-notice calls and work through the schedule to fit urgent situations in. A burning smell near an outlet, sparking at a switch, or a breaker that will not hold a reset are not problems to leave until next week. We take calls every day from 8 AM to 11 PM, so a problem that shows up on a Sunday evening does not have to sit until Monday morning.
For rental properties and businesses that have to stay operational, we plan the work around what the property can and cannot lose. Some jobs only need a single circuit isolated. Others require a brief full shutdown, and we coordinate that around the tenant's schedule or the business's hours so the disruption is as short as possible. Clear communication from the first call to the final test means the property manager or business owner knows what to expect before anyone arrives. Take a look at the services page to see what else is covered.
Regional winters bring multi-day outages from ice storms and wind events, and a properly wired generator connection is what keeps a home functional when the grid goes down. The electrical side of that job involves a transfer switch, a dedicated circuit to the connection point, and a load review to confirm the panel can carry the configuration. We handle the wiring and the transfer switch installation. We do not install or service the generator unit itself, but we handle everything on the electrical side that makes the hookup safe.
Panel capacity comes up on almost every major upgrade call. A 100-amp panel was adequate for a house built in a different era of electrical load. An EV charger, an electric dryer, a finished basement with its own circuits, and a generator connection can push that panel past what it was designed to carry. A panel upgrade to 200-amp service gives the home the headroom it needs. We run the load calculations, handle the service entrance work, and pull the required permits so the inspection moves forward cleanly.
Recessed lighting installs read as simple, but the wiring behind them involves circuit sizing, box placement, and in older homes, running new wire through finished ceilings without tearing them apart. We handle the full installation: the circuit from the panel, the boxes, the fixtures, and the switches. LED retrofits for existing fixtures are a common request from property managers updating multiple units at once.
Structured wiring for data, doorbell systems, and low-voltage devices needs to be planned around the rest of the electrical rough-in, not added afterward. We handle the rough-in for these systems as part of a larger wiring project or as a standalone call. Getting the runs in before the drywall goes up saves considerably more work later.
A detached garage, a workshop, or a shed that needs more than a single circuit usually calls for a subpanel rather than running individual circuits back to the main panel. We install subpanels sized to the load the space requires and run the feeder from the main panel with the correct wire gauge and breaker. For electric gates and outbuildings that only need a single supply, we run the dedicated circuit and install the correct disconnect at the point of use.
A stairway, a long hallway, or a large room with multiple entry points often needs switching from more than one location. Three-way and four-way switch configurations handle that, but the wiring is more involved than a standard single-pole switch, and the traveler wires have to be run correctly for the circuit to work from every location. We install new multi-location switching and troubleshoot existing configurations that have stopped working correctly.
Finding the Panel and Getting to It
In the homes we work in across Sterling Heights, the main panel is most often in the garage or the basement. Finished basements sometimes have the panel tucked into a utility room or a storage area, and access matters when the work involves replacing the panel or pulling new circuits from it. We confirm the panel location on the call so the visit does not start with a search.
What makes a visit go quickly is straightforward: the panel is accessible, the area around it is clear, and the circuits are labeled. Unlabeled breakers slow the diagnostic process because we have to trace each one before we can isolate the right circuit safely. If the panel has never been labeled, we map it as part of the visit.
What Turns Up in Houses of a Certain Age
Knob-and-tube wiring shows up in homes built in the earlier part of the twentieth century, and it is still present in some Sterling Heights properties that have never been fully rewired. The conductors themselves are not always the problem. What makes knob-and-tube a concern is the absence of a ground conductor, the way insulation deteriorates over time, and the fact that it was not designed for the loads a modern household puts on it. Where it is present and active, we replace it. Where it has been deactivated and left in place, we assess whether it poses any current risk.
Aluminum branch circuit wiring from a later period is a different issue. The connections are what matter most. Aluminum expands and contracts differently from copper, and connections that were made with the wrong devices or that have loosened over time can generate heat at the junction. Remediation involves addressing the connections at every outlet, switch, and fixture on the affected circuits rather than replacing all the wire. We treat your home the way we would want ours treated, which means we explain what we found and what the remediation actually involves before any work starts.
Some jobs require isolating only one circuit. Replacing an outlet, adding a new switch, or running a dedicated circuit to a single appliance can usually be done without taking the whole house dark. We identify which breaker controls the affected circuit, confirm it is off, and work from there.
Jobs that involve the main panel, the service entrance, or the grounding system require a full shutdown. That typically means the utility has to pull the meter before work begins, and the power is off for the duration of that part of the job. We plan that around the household or the business. For someone working from home, that means scheduling the shutdown for a time that does not land in the middle of a call or a deadline. For a business, it means coordinating with whoever manages the space so the outage is expected and as short as possible.
Arc-fault and ground-fault breaker installations, surge protection, and grounding and bonding work often require the panel to be de-energized as well. We confirm what the job needs before the visit.
Homes and Properties Served Throughout the Area
We cover Sterling Heights and the communities around it throughout Macomb County and into the neighboring area. That includes Utica, Fraser, Clinton Township, Troy, and Warren. Whether the property is in the city or further out in the county, the same scope applies: repairs, panel work, lighting, generator hookups, EV charger wiring, and everything else we handle.
If you are not sure whether your address falls within our service area, call and ask. We will confirm it on the call and get you on the schedule if you are in range.
A quote can change if the work reveals something that was not visible or known at the time of the original scope. A common example is opening a wall to replace an outlet and finding wiring that needs to be addressed before the new work can be completed safely. We explain what we found and what it means for the cost before we continue.
Panel upgrades, dedicated circuits for EV chargers and major appliances, and repairs to older wiring are among the most common calls we get in this area. Homes built in the mid-twentieth century frequently need knob-and-tube replacement or aluminum wiring remediation, and properties that have never had their panels touched often need an upgrade before modern loads can be added.
Call (947) 999-8795 and we will talk through what your property needs.
The scope depends on how much the space needs to carry. A single supply circuit handles basic lighting and a few outlets. A workshop or garage with power tools, a compressor, or an EV charger typically calls for a subpanel with its own feeder from the main panel. We run the load calculation, size the feeder and subpanel correctly, and pull the required permit so the work is inspected.
Call (947) 999-8795 and we will talk through what the space requires.
Yes. We serve Sterling Heights and the surrounding communities throughout Macomb County, including Utica, Fraser, Clinton Township, Troy, and Warren.
If you are not sure whether your address is in our service area, call (947) 999-8795 and we will confirm it on the call.
A load calculation adds up the electrical demand of everything connected to the panel: lighting, outlets, appliances, HVAC equipment, and any dedicated circuits. The total tells us whether the existing service can handle the current load plus whatever is being added, or whether the panel and service entrance need to be upgraded first.
If we find wiring or a previous installation that presents a safety concern, we stop and explain what we found before continuing. We do not work around an unsafe condition. The options for addressing it are explained clearly so you can decide how to proceed.
Yes. A buyer arranging a pre-purchase inspection before closing is a common reason for a call. We treat the inspection the same way regardless of whether the person calling is the current owner, a buyer, or a property manager acting on someone's behalf.
Any outlet near water requires GFCI protection, a weatherproof cover rated for outdoor use, and in many cases a weatherproof-in-use cover that protects the outlet even when a cord is plugged in. The specific requirements depend on the proximity to water and what the outlet will be used for. We confirm the right configuration before the installation.
We are available every day from 8 AM to 11 PM. The price is confirmed before the visit is scheduled, and the scope is explained before any work begins. Power restored. Code-compliant. Done right.
Call (947) 999-8795 and we will get the job on the calendar.
Someone who knows the work will answer and can scope the job on the call, so you have a real answer before you commit to anything.
For every town we reach, see our area list. We are also in: Troy, Warren, Shelby Township, Royal Oak, Bloomfield Township.
Below is a plain-language look at the electrical work we handle for homes and businesses in Sterling Heights and across Macomb County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job on your list is not here, call and we will tell you exactly what it involves.
| Type of Work | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Lighting Installation | Recessed LED and pendant fixtures, Exterior and security lighting, Under-cabinet lighting, Motion-sensor and photocell wiring | Homeowners updating interior lighting or adding outdoor fixtures for safety and function | Outdoor fixtures tied to a timer or photocell need a properly rated circuit run from the panel. We handle the wiring from the panel out. |
| Ceiling Fan Installation | Fans with and without existing wiring, New switch legs where needed, Box upgrades for fan-rated support, Remote and wall-control wiring | Homeowners adding a ceiling fan in a room that has no existing wiring or a light-only box | A standard light box is not rated to support a fan. We confirm the box and the wiring before the fan goes up. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrade, Fuse box to breaker panel conversion, Load calculation before sizing, Permit and inspection coordination | Sterling Heights homeowners adding an EV charger, finishing a basement, or running out of breaker slots | Many Sterling Heights homes still have 100-amp service or a fuse box. A 200-amp upgrade clears the way for EV chargers, electric appliances, and modern circuit loads. |
Call (947) 999-8795 and we will go through the details of your job, confirm what the panel can support, and give you a price before anything is scheduled.
(947) 999-8795