Most people reach for the phone to call a handyman when an outlet stops working, a ceiling fan needs replacing, or a light fixture gives out. Those calls belong to an electrician. The wiring behind the wall, the load on the circuit, and the protection that code requires at that location are the parts a handyman skips, and they are the parts that matter. We handle that work for homes and businesses across Clinton Township, and we do it the way it needs to be done: the wiring done properly, start to finish.
Clinton Township is a city with a lot of housing, a lot of rental property, and a lot of buildings that have been added onto, updated, and handed from one owner to the next. Each of those transitions leaves a record in the wiring. We work with homeowners getting ready to sell, property managers dealing with tenant complaints, and business operators who need a circuit or a panel handled without a long wait.
Call (947) 999-8795 and we will talk through what the job involves.
Some of the most common electrical calls involve spaces that most people never think about until something goes wrong. An attic with a junction box buried under insulation, a crawl space with wiring run decades ago along the joists, a vaulted ceiling where a fan box was never properly braced for a fan. Each of those changes how the job gets planned before anyone picks up a tool.
We scope the access before we start. If a fixture location requires attic work to run a proper cable, we say so on the call and factor it into the price. If a crawl space has to be entered to trace a fault or run a new circuit to an outbuilding, that is part of the job and it is explained on the call before anything is scheduled. Clear communication from the first call to the final test means you know what the visit covers before it starts.
Tall ceilings add a different set of considerations. A two-story foyer or a great room with a ceiling fan at fifteen feet is not a one-person ladder job. The box has to be rated for the fan weight, the wiring has to reach the switch location, and the whole thing has to be done safely. We plan for it.
Macomb County has a lot of housing stock that was built when electrical standards were different, and some of it has never been touched since. Knob-and-tube wiring turns up in older homes, running through ceiling joists and wall cavities without a ground conductor and without the insulation ratings modern wiring carries. It is not automatically dangerous if it has been left alone, but it becomes a problem when it gets covered with blown-in insulation, spliced into with modern cable, or loaded beyond what it was designed to carry.
Aluminum branch circuit wiring is a different issue. It was used widely in residential construction during a period when copper prices were high, and it is still in place in a significant number of homes in this area. The concern is not the wire itself but the connections. Aluminum expands and contracts at a different rate than the devices and terminals it connects to, and loose connections generate heat over time. Remediation means going through the connections at every device and either replacing the devices with ones rated for aluminum or adding the correct connector at each termination.
We service this area, and its neighborhoods each have their own wiring. Some homes need a full knob-and-tube replacement. Others need aluminum remediation at the panel and at every outlet and switch. Some need both. We tell you which on the call, based on what you describe, and we confirm it on-site before any work starts.
When a home inspection flags aluminum branch circuit wiring, the follow-up call is usually about what it takes to address it. The answer depends on how many circuits are involved and what condition the connections are in. We go through each device location, assess the termination, and either replace the device with one rated for aluminum or install a listed connector that allows a copper pigtail. The goal is a stable connection at every point in the circuit.
A detached garage or a workshop that needs more than a single circuit gets a subpanel. The subpanel feeds from the main panel through a dedicated breaker and feeder cable, and it gives the outbuilding its own set of breakers for the circuits inside. The calculation that matters is whether the main panel has the capacity to support the feeder without overloading the service. We run that before anything is sized.
A Level 2 charger runs on a 240-volt dedicated circuit, and the panel has to have an open slot and enough remaining capacity before that circuit can be added. If the panel is at or near capacity, a panel upgrade and an EV charger circuit can often be scoped together. We check the panel first and give you a clear answer on what the installation requires before the work is scheduled.
Low-voltage wiring for doorbells, data runs, and structured cabling gets treated as an afterthought on a lot of jobs, and then it causes problems later. We handle the rough-in for data ports, doorbell wiring, and low-voltage installations as part of a larger project or as a standalone call. Getting it done before the drywall goes up is always the better approach.
An intermittent fault is one of the harder electrical problems to chase down because it does not show itself on demand. A breaker that trips twice a week, a circuit that loses power under certain conditions, or a GFCI that trips for no visible reason all point to something in the circuit that needs to be traced rather than guessed at. We work through the circuit systematically: load, connections, devices, and wiring condition, until we find what is causing it.
The electrical side of a generator hookup is the transfer switch, the feeder from the panel to the connection point, and the load review that confirms the panel can carry the configuration. The transfer switch is what makes the hookup safe. It isolates the home from the utility line before the generator feeds the panel, so the generator power cannot back-feed into the grid. We handle all of the wiring and the transfer switch installation. We do not install or service the generator unit itself.
Electrical problems don't wait, and neither do we, so we keep the scheduling process direct. When you call, we talk through the job, confirm what the visit covers, and give you a price before anything is booked. We are available every day from 8 AM to 11 PM, which means you are not waiting until the start of the business week to get a real answer.
For rental properties, we understand that a tenant complaint about a dead outlet or a tripping breaker is not a problem that sits on a list. We work with property managers who need a repair handled between tenants and with landlords who need a unit brought up to code before a new lease starts. Electrical service scheduled without the runaround is what you get when you call.
For businesses and commercial properties that have to stay open, we talk through the scope on the call and plan the work around what the space can accommodate. Some jobs can be phased. Some can be done in off-hours. We figure out what works before the visit, not after we arrive. Start with our wiring and panel services page if you want the detail before the call.
The price is settled on the call, based on what you describe and what the job involves. You get a clear rate before anything is scheduled, and the scope is confirmed on-site before the work starts. If what we find on-site changes the scope, we explain why before any additional work continues. You are not left figuring it out after the invoice arrives.
A few things can move a quote in either direction. What the fault turns out to be once we get into the circuit matters. Whether the existing panel has the capacity to support a new circuit matters. Whether the wiring behind the wall is accessible or has to be fished through finished surfaces matters. We work through those on the call as best we can from what you describe, and we confirm everything on-site.
There is no charge to discuss the job on the phone.
Call (947) 999-8795, describe what you are seeing, and we will tell you what the visit involves and what it costs before anything is booked.
When we find electrical work that was done incorrectly, the first question is what it actually requires. Not everything done outside of code is a tear-out. A junction box that was not properly secured, a device wired with the wrong gauge, or a circuit that was added without a dedicated breaker can often be corrected without opening up a wall. We fix what can be fixed and replace what cannot, and we explain the difference before we start.
Where the previous work is genuinely hazardous, we say so plainly. Buried splices, overloaded circuits, and missing ground conductors are not cosmetic problems. We tell you what we found, what it takes to address it, and what happens if it is left alone. Reach out and we'll get it diagnosed.
We cover Clinton Township and the surrounding area throughout Macomb County. That includes Mount Clemens, Fraser, Harrison Township, Macomb Township, and Sterling Heights. Whether the property is in the city or out in the county, the same electrical work applies: repairs, panel upgrades, new circuits, generator hookups, EV charger wiring, and everything else on the list.
If you are not sure whether your address falls within our service area, call and ask. We will confirm it on the call and get the job scheduled if we cover your location.
We do. Rental property calls in Clinton Township often involve repairs between tenants, code compliance work ahead of a new lease, or troubleshooting a tenant complaint about a circuit that is not behaving correctly. We work with landlords and property managers who need the job handled without delays, and we scope the work on the call so there are no questions about what the visit will cover.
In many cases, yes. Panel work requires the main power to be off, but it is usually for a defined period rather than the whole day. For circuit work that does not involve the main panel, we can often keep the rest of the house live while one section is being worked on. We confirm what is possible for your specific job when you call.
Yes. A significant portion of the housing in this area was built during periods when knob-and-tube and aluminum branch circuit wiring were standard, and we handle both. Knob-and-tube replacement, aluminum wiring remediation, and panel upgrades for homes that have never had their service updated are all work we take on regularly in this area. We assess what is actually there before recommending what needs to change.
We work with homeowners, landlords, property managers, and business operators throughout Clinton Township and the surrounding Macomb County area. The mix of housing and commercial property in this city means the calls range from single-outlet repairs in a residential unit to panel upgrades and circuit work in larger commercial spaces.
Call (947) 999-8795 and we will talk through what your situation involves.
Yes. A buyer arranging a pre-purchase inspection before closing is a common reason for a call. We treat the inspection the same way regardless of whether the person calling is the current owner, a buyer, or a property manager acting on someone's behalf.
We are available every day from 8 AM to 11 PM.
The next step is a phone call to (947) 999-8795.
We scope the job on the call, confirm the price before anything is scheduled, and get the work on the calendar. For problems that cannot wait, call us directly and we will tell you what the schedule allows.
Call (947) 999-8795 and Pontiac Electrical Company will take care of it.
Browse our area list. We also take electrical work in: Macomb Township, Sterling Heights, Shelby Township, Warren.
Below is a plain-language look at the electrical work we handle for homes and businesses in Clinton Township, Macomb County and across Macomb County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job on your list is not here, call and we will tell you exactly what it involves.
| Type of Work | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Whole-Home Surge Protection | Panel-mounted surge protector installation, Protection for all circuits at once, Guards against utility line voltage spikes, Pairs with an EV charger or panel upgrade | Homeowners with sensitive electronics, smart devices, or a new EV charger who want panel-level protection | A single surge event can damage appliances, electronics, and wiring. A panel-mounted unit covers every circuit in the house at once. |
| Electrical Repairs & Troubleshooting | Dead outlets and tripped breakers, Flickering or dimming lights, Burning smells and sparking devices, Systematic fault diagnosis | Any home or business with an electrical problem that needs a cause, not just a reset | A burning smell or a sparking outlet calls for immediate attention. We trace the fault to its source before anything is replaced. |
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrade, Fuse box to breaker panel conversion, Load calculation before sizing, Permit and inspection coordination | Clinton Township, Macomb County homeowners adding an EV charger, finishing a basement, or running out of breaker slots | Many Clinton Township, Macomb County homes still have 100-amp service or a fuse box. A 200-amp upgrade clears the way for EV chargers, electric appliances, and modern circuit loads. |
Call (947) 999-8795 and we will go through the details of your job, confirm what the panel can support, and give you a price before anything is scheduled.
(947) 999-8795