Something small leads to something bigger more often than most people expect. A homeowner calls about a light fixture that stopped working, and when we trace the circuit we find a connection that has been arcing inside the wall. A property owner books an outlet swap and the box turns out to be on aluminum branch wiring that was never remediated. We do not expand scope for its own sake, but we do tell you what we found and what it means before we leave. That is the conversation that matters, and it starts on the first call.
Birmingham is a small city with a housing stock that reflects it. A lot of these homes were built decades ago, and the wiring inside them was designed for a different set of demands. When we come out for a repair, we look at what the repair is sitting on, not just the symptom itself. We handle the full range of electrical work here, from a single dead outlet to a panel replacement to a whole-house rewire, and we are available every day from 8 AM to 11 PM.
Running a new circuit through a finished home often means getting into spaces that were not designed with comfort in mind. Attic access, crawl space clearance, and the insulation packed around older framing all affect how a job gets planned and how long it takes. A circuit that looks straightforward from the panel can require working in tight quarters to get it from one floor to another without opening walls. We scope that on the call so you know what the visit involves before anyone shows up.
Ceiling fan and fixture installation in a room with a ten-foot or vaulted ceiling is a different job than the same work in a standard room. The box needs to be rated for the weight and the motion, the wiring has to reach the height safely, and the work has to be planned around what is already in the ceiling cavity. We treat your home the way we would want ours treated, which means thinking through access before we start rather than working around it after.
The price on any electrical job comes from three things: what the fault turns out to be, what has to be opened up or accessed to reach it, and whether the existing circuit or panel can carry what the change requires. A repair that looks like a simple outlet replacement can involve a load calculation if the circuit is already near capacity. A lighting upgrade that seems like a fixture swap can change when the wiring behind the box is not rated for the new fixture.
We give you the rate on the call, based on what you describe and what the job involves. If the scope changes once we are on-site, we explain why before the work continues. You get a clear price before anything is scheduled, and you get a straight answer when you ask what it covers. The process is written out on the page covering our electrical services.
Call (947) 999-8795 and we will talk through what you are dealing with.
An electric range or wall oven draws more current than almost anything else in a kitchen, and a dryer is not far behind. Both require a dedicated 240-volt circuit sized to the appliance load. If you are replacing a gas range with an electric one, or adding a dryer where there was not one before, the circuit has to be run from the panel to the appliance location. We check panel capacity as part of that job, because adding a 240-volt circuit to a panel that is already near its limit is not a fix, it is a problem waiting to happen.
Recessed LED fixtures, pendant lights, chandeliers, under-cabinet strips, and ceiling fans all involve more than swapping what is already there. The box in the ceiling has to be rated for the weight and the type of fixture. The wiring has to be compatible with the load. Dimmer switches require a dimmer-rated fixture to work correctly. We handle the whole installation rather than just the part that is visible from the floor.
Knob-and-tube wiring and aluminum branch circuits are common in Birmingham's older homes, and both raise questions that come up during insurance reviews, pre-sale inspections, and code compliance work. A partial rewire addresses the circuits that are most at risk. A full rewire replaces the branch wiring throughout the home and brings the system up to current standards. Either way, the work starts with a clear picture of what is there and what the replacement involves.
A welder, an air compressor, or any piece of shop equipment with a large motor draws a surge of current when it starts up. Running that equipment on a shared household circuit causes nuisance tripping at best and wiring damage at worst. A dedicated circuit sized for the equipment's starting load solves the problem. We handle the circuit from the panel to the outlet location, including the correct outlet type and any conduit the installation requires.
Outdoor lighting tied to a photocell, a motion sensor, or a timer needs a circuit that is protected for outdoor use and landed at a weatherproof outlet or junction box. Security lights on the eaves, landscape fixtures along a path, and soffit lighting all involve running wire to locations that are not always easy to reach. We plan the routing before we start so the finished installation does not leave exposed conduit where it does not belong.
Most rental property calls come from the owner or a property manager rather than the tenant. The person who books the visit is usually the person who gets the invoice, and that is how we handle it. Access can be arranged directly with a tenant if the owner or manager sets that up in advance. We confirm the access plan on the call.
Landlords and property managers often need a record of what was done, particularly when the work involves a panel upgrade, arc-fault or ground-fault breaker installation, or any wiring that was brought up to code. We document what was replaced or installed and explain the findings clearly. If the work was done in response to a failed inspection or a flagged item on a report, we can confirm what was addressed so the follow-up inspection has a clear record to work from.
Electrical problems don't wait, and when a fault is active, we take the call and work to get it on the calendar as quickly as the schedule allows. A tripped breaker that will not hold a reset, a burning smell from a panel, or a sparking outlet are not situations to leave until next week. We are available every day from 8 AM to 11 PM, and calls placed in the evening are handled the same way as calls placed in the morning.
For tenants and businesses that have to stay open or occupied during the work, we talk through the plan on the call. Some jobs can be sequenced so a room or a circuit is only out of service for a short window. Others require a longer outage, and we tell you that up front so you can plan around it. Clear communication from the first call to the final test is how the visit goes, whether the property is occupied or not.
We serve Birmingham and the communities around it throughout Oakland County, including Beverly Hills, Bloomfield Hills, Clawson, Berkley, and Bingham Farms. The same range of electrical work applies across all of them: repairs, panel upgrades, new circuits, lighting, generator hookups, rewiring, and everything else on the list.
If you are not sure whether your address falls within our service area, call and we will confirm it on the call. Electrical service scheduled without the runaround is what you get when you reach us.
An electrical safety inspection goes through the panel condition, branch circuit wiring, grounding and bonding, GFCI and AFCI protection, and the visible wiring throughout the home. We note anything that does not meet current standards and explain the findings before any work is discussed. A pre-sale inspection gives a seller the chance to address issues before they appear in a buyer's report, and it gives a buyer a clear picture of what the system looks like.
Outlets and lighting in the same room are often on separate circuits. If the outlets are dead but the lights are on, the outlet circuit has likely tripped or has a fault. The first place to check is the panel for a tripped breaker, and the second is any GFCI outlet in the area, since one tripped GFCI can cut power to several outlets downstream.
Homes built in the mid-twentieth century in Birmingham frequently have knob-and-tube wiring, aluminum branch circuits, or panels that were sized for a lighter load than a modern household puts on them. Those three issues come up regularly during pre-sale inspections and insurance reviews. We handle rewiring, aluminum wiring remediation, and panel replacements for homes that need to be brought up to current standards.
Yes. We serve Birmingham and the surrounding area throughout Oakland County, including Beverly Hills, Bloomfield Hills, Clawson, Berkley, and Bingham Farms. The same range of electrical work applies across all of those communities.
If you are not certain whether your address is covered, call (947) 999-8795 and we will confirm it on the call.
You do not need to know what is wrong before you call. Describing what you are seeing is enough. A breaker that keeps tripping, a light that flickers, a room that lost power, a smell near the panel. We take it from there.
Call (947) 999-8795 and we will talk through the situation, give you a price, and get the work on the schedule.
We are available every day from 8 AM to 11 PM. Power restored. Code-compliant. Done right.
Take a look at our area list. Also serving: Bloomfield Township, Royal Oak, Troy.
Below is a plain-language look at the electrical work we handle for homes and businesses in Birmingham and across Oakland County. Each row covers what the service includes, who it fits best, and one practical thing worth knowing before you call. If a job on your list is not here, call and we will tell you exactly what it involves.
| Type of Work | Scope of Work | Best For | Good to Know |
|---|---|---|---|
| Electrical Panel & Service Upgrades | 100-amp to 200-amp service upgrade, Fuse box to breaker panel conversion, Load calculation before sizing, Permit and inspection coordination | Birmingham homeowners adding an EV charger, finishing a basement, or running out of breaker slots | Many Birmingham homes still have 100-amp service or a fuse box. A 200-amp upgrade clears the way for EV chargers, electric appliances, and modern circuit loads. |
| Electrical Safety Inspections | Panel and branch circuit review, Grounding and bonding check, GFCI and AFCI coverage audit, Written findings after the visit | Buyers, sellers, landlords, and owners of older homes who want a clear picture of the system | A pre-purchase inspection on an older Birmingham home often surfaces wiring that has not been updated since the home was built. |
| Breaker & Fuse Repair | Breakers that trip repeatedly, Breakers that will not hold a reset, Fuse box evaluation, Failed breaker replacement | Homeowners with an older panel or a breaker that keeps shutting off a circuit | A breaker that trips without a clear load reason usually points to a wiring fault or a failing breaker, not a temporary overload. |
Call (947) 999-8795 and we will go through the details of your job, confirm what the panel can support, and give you a price before anything is scheduled.
(947) 999-8795