Moote Electrical has served Pontiac and Oakland County since 1959, and we still pick up the phone when you call. Whether you need same-day repairs or a full electrical overhaul, we show up ready to work. Family-owned. Locally rooted. Ready to wire.
We are trusted by local homeowners and property managers for their electrical work, and we have been for more than six decades. From a tripped breaker at midnight to a panel upgrade for a growing business, we handle it all across Pontiac and the surrounding area. Call (947) 999-8795 for a quote.
The hardest part of an electrical problem is knowing when to call, but most signs are worth taking seriously. Dead outlets, flickering lights, a breaker that trips every time you run the microwave, a burning smell near a receptacle, sparks when you plug something in, or a room that suddenly has no power at all. These are not problems to wait on.
We diagnose the issue first, then fix it correctly. That means checking for electrical shorts, tracing the circuit, testing GFCI protection where it is required, and replacing outdated breakers with arc-fault (AFCI) protection where current code applies. Half-power in the house often points to a failed leg at the service entrance, and we track those down too.
We'll handle the wiring so you don't have to.
When the electrician arrives, the real work begins, and the list of common residential installs is long. We handle all of it: standard outlets, GFCI outlets in kitchens and bathrooms, USB receptacles, weatherproof outdoor outlets, and garage circuits. Switches, dimmers, and smart-switch wiring. Every type of lighting from recessed can lights and chandeliers to under-cabinet strips, pendant fixtures, landscape lighting, security lighting, and exterior fixtures. Ceiling fans with or without existing wiring.
Every install is wired and grounded to code. We take pride in the electrical work we leave behind, and that shows in the details, from a properly bonded outdoor fixture to a dimmer that does not buzz.
Let us handle the panel and the permits.
Keeping a home safe starts with the wiring behind the walls, and for a lot of homes in Pontiac, that wiring is overdue for attention. We replace and upgrade breaker panels, install subpanels, and run dedicated circuits for appliances, workshops, EV chargers, and anything else drawing consistent load. When a home is being pushed from 100-amp to 200-amp service, we handle the load calculations, the service-entrance work, and the meter upgrade coordination.
Older homes in Oakland County sometimes still have knob-and-tube wiring or aluminum branch circuits. Both are reasons to call. Knob-and-tube cannot support modern electrical loads safely, and aluminum wiring requires specific connectors and inspection to stay code-compliant. We handle the rewire and the documentation.
We pull the permit. We wire it to code. We stand behind it.
We work for homeowners, landlords, property managers, and business owners across the area. On the residential side, that means home rewiring, addition wiring, and remodel circuits for kitchens, bathrooms, basements, garages, and workshops. We wire smoke detectors and carbon monoxide detectors, install bathroom exhaust fans, and handle hot tub electrical hookups when the panel capacity and dedicated circuit work are needed.
On the commercial side, we repair and upgrade panels for offices, retail spaces, and restaurants. We handle tenant improvement wiring, commercial lighting installation, and commercial outlet work. Before a property changes hands, an electrical safety inspection or a pre-purchase electrical inspection can surface problems before they become negotiating headaches or liability issues. We offer both.
Local roots mean we are invested in getting it right. Whether you own one house or a portfolio of properties, you get straight answers about your panel and wiring, no surprises.
Michigan winters hit hard in this part of the state. Multi-day outages from ice storms, sub-freezing temperatures that freeze pipes overnight, and heavy electrical loads from winter heating systems are a normal part of life here. These three services come up every season for a reason.
A standby generator is only as useful as the transfer switch and wiring behind it. We install the transfer switch, run the dedicated circuit from the panel, and make sure the generator connects to your home's electrical system safely and to code. When an ice storm knocks out power for two or three days, that wiring is what keeps the lights on and the heat running. We size the panel capacity for the load and handle the permit work.
Pontiac has a lot of older housing stock, and many of those homes are running panels that were never sized for modern electrical loads. Add in the draw from electric baseboard heat, space heaters, or the circuits that feed a furnace or boiler, and an undersized panel becomes a real problem. We upgrade to 200-amp service, install subpanels where needed, and run the load calculations so nothing is left to guesswork.
Heat tape keeps pipes from freezing along exterior walls and in unheated crawl spaces, but it needs a proper electrical hookup to work safely. That means a dedicated circuit and a GFCI-protected outlet installed to code. We handle that side of the job. If you already have heat tape and the circuit is old or unprotected, we can inspect and upgrade it before the cold sets in.
We've handled everything from a flickering light to a full rewire, and EV charger installation has become one of the more common calls we get across Oakland County. Level 2 charger installation requires a dedicated 240-volt circuit and, in many cases, a panel assessment to confirm available capacity. We handle the circuit, the outlet or hardwired connection, and the permit. Whether you drive a Tesla or any other EV, we wire it right.
Whole-home surge protection is a smart add-on for any home in Michigan. Grid fluctuations, lightning, and storm-related surges can damage appliances, electronics, and smart-home systems in a fraction of a second. A surge protector installed at the panel catches that spike before it reaches your devices. As a family-run electrical business, we recommend it to nearly every customer upgrading their panel or adding circuits.
Call and we'll get the current flowing right.
The sooner you call, the sooner the power is back on, and we make it easy to get on the schedule. Call (947) 999-8795 to request a quote or book a service call. We will walk you through what the job involves and what to expect before anyone shows up at your door.
Same-day availability is real, not a marketing line. For urgent repairs, we work to get there the same day. For emergencies, we have 24-hour availability because electrical problems do not wait for business hours.
All work is performed by licensed electricians. When we give you a price, it reflects the actual scope of the job. No hidden fees, no upsells you did not ask for.
We are based in Pontiac and work throughout Oakland County. Our service area covers the communities around us: Waterford, Auburn Hills, Clarkston, Lake Orion, Bloomfield Hills, Troy, Sylvan Lake, and Keego Harbor. If you are in the area and need an electrician, we are close by and ready to schedule.
For most jobs, we can schedule a same-day appointment when slots are available. For urgent situations where power is out or something is sparking, we prioritize getting someone there as fast as possible. Call (947) 999-8795 and we will let you know what the schedule looks like.
We work throughout Oakland County and cover the communities around Pontiac, including Waterford, Auburn Hills, Clarkston, Lake Orion, Bloomfield Hills, Troy, Sylvan Lake, and Keego Harbor. If you are nearby and unsure whether we cover your address, give us a call and we can confirm.
Stop using the outlet or circuit immediately and do not plug anything else into it. If the panel itself is sparking or making a loud buzzing sound, shut off the main breaker if it is safe to do so and call us right away. These are signs of a serious fault that should not wait. We take emergency calls and will get someone out as quickly as possible.
Yes. We are available every day from 8:30 AM to 8:00 PM, including Saturdays and Sundays. Electrical problems do not follow a Monday-through-Friday schedule, and neither do we.
A breaker that trips repeatedly is telling you something is wrong, and resetting it without finding the cause can make the underlying problem worse. The issue could be an overloaded circuit, a failing breaker, a short in the wiring, or a device drawing too much current. We diagnose the actual cause and fix it correctly rather than leaving you in a reset loop.
Kitchen circuits carry a heavy load, and a breaker that trips in that area is often dealing with too many high-draw appliances on a single circuit. It can also point to a failing breaker, a wiring fault, or a lack of dedicated circuits for appliances like the refrigerator or microwave. We can trace the problem and, if needed, run dedicated circuits so the kitchen has the capacity it actually needs.
Yes. When you call (947) 999-8795, you reach someone local who knows the Pontiac area and can get you on the schedule. We are a family-owned business, and the people who answer are part of the same operation that shows up at your door.
The cost depends entirely on the scope of the job. A service call to diagnose a tripping breaker is priced differently than a panel upgrade or a whole-home rewire. We give you a clear picture of what the work involves and what it will cost before anyone starts. There are no surprise fees added at the end.
We explain the scope and the price before work begins. If we open a wall or trace a circuit and find something that changes the scope, we stop and talk to you before proceeding. You will not find work done without your knowledge or a number on the invoice that you did not agree to.
Payment is due when the work is complete. We will walk you through the invoice and make sure everything reflects what was discussed before you pay anything.
For most of our Oakland County service area, there is no added travel fee. If you are on the outer edge of our coverage area, we will let you know upfront when you call. No surprises.
Moote Electrical has been doing this work in Pontiac since 1959. We show up on time, we explain what we find, and we do the job correctly the first time. Whether you need a single outlet replaced or a full commercial panel upgrade, we are the local crew that has been here for 67 years and plans to stay.
Family-owned. Locally rooted. Ready to wire.
Call (947) 999-8795 for a quote or to schedule a service call.
We have been handling electrical work in Pontiac and across Oakland County since 1959, and the range of jobs we take on reflects what homeowners and businesses here actually need. The table below covers every service we offer, who each one is right for, and a practical note to help you decide what to do next. Call (947) 999-8795 and we will walk you through the specifics.
| Electrical Service | What It Covers | Common Situations | Worth Knowing |
|---|---|---|---|
| Heat Tape Installation | dedicated circuit for heat tapeGFCI-protected outlet installationexisting circuit inspection and upgrade | homes with pipes along exterior walls or in unheated crawl spaces where freezing is a seasonal risk | Heat tape must be on a dedicated, GFCI-protected circuit to operate safely. An unprotected or aging circuit is a fire risk. |
| Outlet and Switch Installation | standard and GFCI outletsUSB receptaclesweatherproof outdoor outletsdimmer and smart-switch wiring | homeowners adding convenience or upgrading to current code | GFCI protection is required by code in kitchens, bathrooms, garages, and outdoor areas. We verify compliance on every install. |
| Electrical Repairs and Troubleshooting | dead outlets and tripped breakersflickering or dimming lightsburning smells or sparkscircuit tracing and fault diagnosis | any homeowner or business with an unexplained electrical problem | Most repair calls benefit from same-day scheduling; do not wait on sparking outlets or a burning smell. |
| Breaker and Fuse Repair | breaker replacementfuse panel assessmentAFCI and GFCI breaker upgradesrepeatedly tripping circuit diagnosis | homes where a breaker trips regularly or a fuse blows without a clear cause | A breaker that trips repeatedly is a symptom, not the problem. We find the underlying cause before replacing hardware. |
| Lighting Installation | recessed and ceiling fixtureslandscape and security lightingunder-cabinet and pendant lightingexterior and garage fixtures | remodels, additions, and any room where existing lighting is inadequate | Outdoor fixtures must be properly bonded and rated for exposure. We handle the wiring and grounding, not just the fixture swap. |
| Backup Generator Installation | transfer switch installationdedicated generator circuitpanel capacity sizingpermit and code compliance | homeowners and businesses that cannot afford to lose power during Oakland County ice storms and multi-day outages | The transfer switch and wiring are what make a generator safe and legal. We handle that side of the job completely. |
| Electrical Safety Inspections | pre-purchase and pre-sale inspectionsrental property inspectionspost-renovation code reviewolder home safety assessment | buyers, sellers, landlords, and property managers who need a clear picture of the electrical condition | An inspection before a property changes hands can surface problems before they become liability issues or negotiating surprises. |
| Ceiling Fan Installation | new fan with or without existing wiringfan-rated box installationswitch and dimmer wiring | homeowners adding a fan to a room that currently has only a light fixture or no overhead wiring | Ceiling fans require a fan-rated junction box. Standard light boxes are not rated for the load and movement. |
| Wiring and Rewiring | whole-home rewireaddition and remodel wiringknob-and-tube and aluminum wiring replacementnew construction rough-in | older homes with outdated wiring or any property undergoing a major renovation | Knob-and-tube wiring cannot safely support modern electrical loads. Aluminum branch circuits require specific connectors and a full inspection. |
| Dedicated Appliance Circuits | refrigerator, microwave, and dishwasher circuitsworkshop and garage circuitshot tub electrical hookuplaundry and dryer circuits | kitchens, workshops, and any space where high-draw appliances share a circuit and cause trips | A dedicated circuit prevents nuisance tripping and reduces the risk of overloading shared wiring in older homes. |
| EV Charger Installation | Level 2 240-volt circuithardwired or outlet-based connectionpanel capacity assessmentpermit and inspection | homeowners adding an electric vehicle who need a faster, safer charge than a standard 120-volt outlet provides | Level 2 charging requires a dedicated 240-volt circuit. We assess panel capacity first so the install is sized correctly from the start. |
| Garage and Block-Heater Circuits | dedicated garage outlet circuitsblock heater outlet installationGFCI protection in garage spaces | Michigan homeowners who plug in vehicles overnight during cold months and need reliable, protected power in the garage | Block heater outlets in garages should be GFCI-protected and on a circuit sized for the load. Many older garages are not wired to current standards. |
| Whole-Home Surge Protection | panel-level surge protector installationprotection for appliances and electronicspost-storm surge risk assessment | any home in Michigan where grid fluctuations, lightning, and ice-storm outages are a regular seasonal reality | A surge protector at the panel catches spikes before they reach your devices. It is one of the most cost-effective add-ons during a panel upgrade. |
| Electrical Panel and Service UpgradesMost Popular | 100-amp to 200-amp service upgradesubpanel installationload calculationsmeter upgrade coordination | older homes with undersized panels, homeowners adding EV chargers, or any property adding significant electrical load | Many Pontiac homes still run on panels sized for a fraction of today's electrical demand. We handle the permit, the service-entrance work, and the utility coordination. |
How do I know if my panel needs to be upgraded?
A few signs point toward an overdue panel upgrade: breakers that trip regularly without an obvious cause, a panel that feels warm or makes a buzzing sound, lights that dim when appliances kick on, or a home that still runs on a 100-amp service and you are adding an EV charger, a workshop, or other significant load. If your panel is original to a home built before 1980, it is worth having us take a look. We give you straight answers about what we find.
Why does my breaker keep tripping?
A breaker that trips repeatedly is doing its job, which means something is wrong with the circuit or the load on it. The most common causes are too many high-draw devices sharing one circuit, a failing breaker that no longer holds its rated load, a short somewhere in the wiring, or an appliance drawing more current than the circuit was designed for. Resetting the breaker without finding the cause does not fix the problem. We diagnose what is actually happening and correct it.
Is the electrical work permitted and inspected?
Yes. We pull the permit, we wire it to code, and we stand behind it. Permitted work is inspected by the local authority, which protects you when you sell the home and confirms the job was done to current code. We handle the permit process so you do not have to navigate it yourself.
Same-Day and Emergency Availability
For urgent repairs, we work to get there the same day. For emergencies, we are available around the clock because electrical problems do not wait for business hours.
Is older wiring in my home safe?
It depends on the type and condition. Knob-and-tube wiring, which is common in homes built before 1950, was not designed for modern electrical loads and cannot safely support them. Aluminum branch-circuit wiring, found in many homes from the 1960s and 1970s, requires specific connectors and regular inspection to remain code-compliant. If your home has either type, we recommend an inspection. We handle the assessment and, if needed, the rewire.
What does a whole-home rewire involve, and how long does it take?
A full rewire means replacing all the branch-circuit wiring from the panel out to every outlet, switch, and fixture in the home. The timeline depends on the size of the house and how accessible the walls are. A typical single-family home takes several days. We walk you through the scope before work begins so you know what to expect, and we do not start without your sign-off on the plan.
What do I need for a Level 2 EV charger at home?
A Level 2 charger runs on a dedicated 240-volt circuit, similar to what a dryer or range uses. Before we install one, we assess your panel to confirm it has the available capacity. If the panel is undersized or already near its limit, we handle the upgrade at the same time. We run the circuit, install the outlet or hardwired connection, pull the permit, and make sure the install is inspected.
Work Performed by Licensed Electricians
Every job is handled by licensed electricians who know current code and do the work right the first time. We pull the permit, we do the work, and we stand behind it.
How does backup generator hookup work?
A generator is only as useful as the transfer switch and wiring connecting it to your home. We install the transfer switch, run the dedicated circuit from the panel, and make sure the connection meets code. The transfer switch is what prevents back-feeding power onto the utility line, which is a serious safety issue. We size the panel capacity for the generator load and handle the permit. The generator equipment itself is a separate purchase, but we coordinate the electrical side completely.
Do I need to be home while the work is done?
For most jobs, yes, at least at the start and end. We need access to the panel and the areas where work is being done, and we walk you through what we found and what we did before we leave. For multi-day projects, we can work with your schedule to minimize disruption. Call us and we will figure out an arrangement that works.
Experienced With Older and Newer Homes
We have been working on Oakland County homes since 1959, which means we know what is inside the walls of older housing stock and how to bring it up to current standards safely.
How does pricing work, and will the quote change once work starts?
We give you a clear picture of the scope and the cost before anyone starts working. If we open a wall or trace a circuit and find something that changes the scope, we stop and talk to you before going further. You will not find work done without your knowledge or a number on the invoice you did not agree to. We give you straight answers about your panel and wiring, no surprises.
What is the risk of a warm or buzzing outlet?
A warm outlet or one that buzzes or makes a crackling sound is a sign of a loose connection, an overloaded circuit, or a wiring fault. Any of those conditions can cause arcing, which is a leading cause of residential electrical fires. Stop using the outlet, do not plug anything else into it, and call us. This is not a problem to monitor and see if it gets worse.
What is whole-home surge protection, and is it worth it?
A whole-home surge protector installs at the panel and catches voltage spikes before they travel through your wiring to appliances, electronics, and smart-home systems. In Michigan, grid fluctuations during ice storms and lightning strikes are a real seasonal risk. A panel-level protector is one of the most cost-effective additions we make on a panel upgrade or new circuit install, and we recommend it to most customers doing panel work.
Call (947) 999-8795 and we will walk you through exactly what your home or property needs, what the work involves, and what it will cost before anyone picks up a tool.
(947) 999-8795